N3000 Big Digit Universal Process Contoller is a real breakthrough in versatility for holding in one single instrument all the major features required in the vast majority of industrial processes.
With a sophisticated and consistent software and its advanced truly universal circuitry, the N3000 accepts configuration of  both input signal and control output through the front keyboard without any internal hardware change.
Power supply for remote loop powered transmitters is standard and is a must for high-end applications.
From the very simple applications as a temperature controller to the most complex systems of distributed control with PLC’s or SCADA networks, the N3000 is the right answer to your needs for industrial or laboratory automation.

Double LED display: red for PV (18 mm) and green for SV (13 mm)

 
Accepts thermocouples type J, K, T, N, R, S; Pt100 RTD, linear 4-20 mA, 0-50 mV, 0-5 Vcc

 
Sampling rate: 4 measurements per second

 
Measured value resolution: 12,000 levels

 
One digital input for dry contact with 5 programmable functions

 
Remote setpoint input for 4-20 mAdc signal

 
Dual SPST 3 A /250 Vca relays and dual SPDT 5 A / 250 Vca relays can be individually programmed for control or alarm

 
Isolated 4-20 mA output with 1500-level resolution, maximum 550 ohm load for control or PV / SV retransmission. It can also be configured for digital input or output (10 Vcc / 20 mA)

 
Auto tuning PID control. Auto/Manual mode, bumpless transfer

 
Programmable Soft start up to 9999 seconds

 
Ramp and Soak: 7 programs of up to 7 segments each. Can be linked to create longer programs of up to 49 segments

 
Control output update: 250 ms

 
Up to four configurable relays, two timer alarms

 
Alarm functions: LO, HI, differential, differential LO, differential HI, sensor break and event

 
Alarm initial blocking function

 
Power: 100 to 240 Vca, 50/60 Hz; optional 24 Vcc/ca

 
Maximum consumption: 3 VA

 
24 Vcc / 30 mA supply output for remote transmitter excitation

 
RS485 comm with Modbus RTU protocol (optional)

 
Front panel: IP65, Polycarbonate UL94 V-2

 
Back panel: IP30, ABS + PC UL94 V-0

 
Circuitry can be removed from the front panel

 
Operating environment: 0 to 55 ºC, 20 to 85 % RH

 
Dimensions: 96 x 96 x 92 mm

 
Panel cutout: 93 x 93 mm

 
Weight: 330 g